Beginners Guide To Buying Fishing Rods And Reels

Fishing rods serve the purpose of holding your line along a straight path until you are ready to toss it in a specific direction, thus allowing you greater distance when casting your bait into the waters. Two of the main reel types used by anglers are bait-casting and spinning reels.

While both types of equipment are used for essentially the same task, each offers its own unique advantages on the water. Spinning rods should be held with the guides hanging below the rod, towards the ground. The reel should also hang below the rod, and if right handed, the handle should be on the left side of the reel. The guides of this type of rod are bigger near the reel due to the way line unravels from a spinning reel.

Fishing Rods And Reels

Fishing rods and reels can literally break or make one’s fishing trip. With a wide range of fishing rods and reels from various manufacturers, with different spinning reels and designs, it is essential to select the most suitable kind of fishing reels. The right fishing reels largely determine the smoothness of the casting and how fast the catch can be reeled in, which also depends on the type of fish caught.

Much of the success of a fishing trip hinges on the fishing rods and reels, among other time-tested tricks. Thus it only helps to learn more about these essential tools and select suitable fishing reels for a satisfying and fruitful boating experience.

What You Need To Know About Fishing Rods And Reels

Fishing rods and reels are available in all sizes and shapes. Rods range in common lengths from 6 feet to 12 feet however you will find some that are longer or shorter. They are usually rated by power and action. The action of the fishing rod identifies where the rod will bend over the blank and the power represents what part of the rod your hook setting power originates from. These two things will be a factor to consider after you know what kind of fish you will be fishing for.

Fishing reels may be small or large whenever making reference to spincast or spinning reels, standard as well as large arbor styles when talking about fly reels and round or low profile models are found with baitcasting reels, which are certainly starting to become the most popular. Gear ratio identifies the amount of line that is being spooled with regards to a single revolution with the handle. Braking systems are utilized to obtain more control over precisely where your bait lands and additionally drag systems are utilized while reeling a fish in to help you keep from breaking your line.

Each of these factors can have an effect on how productive and pleasurable your excursions are. There are several varieties of fishing rods and reels to pick from. The best choice will undoubtedly be the fishing rods and reels that you will have more success with. This will certainly differ from one individual to another and it will ultimately depend on your own personal preference and what works for you.

 Fishing is a sport that is fun and enjoyable. Owning high quality, well-made fishing rods and reels allow it to be all the more enjoyable. Many of these fishing rods and reels make it feel effortless, but it’s always a joy when you hook that big one that puts up a wild fight. For that reason, you should just go out and do a little experimenting with different types of fishing rods and reels and you will find what works best for you.

Types Of Fishing Reels

The basic types of fishing reels include fly casting, bait casting and spin casting. Fly casting reels are not as complex as the bait casting and spin casting reels, though all these types of fishing reels can be used for both salt water and fresh water fishing. There are also other factors to consider when choosing the appropriate fishing rods and reels.

These factors include the material of the reel, which is greatly dependent on the type and location of fishing. Graphite, aluminum and plastic are some of the common materials used. Graphite, being lighter than aluminum, is usually used to make fish rods and reels for freshwater fishing, while the stronger aluminum is the choice material for fishing reels used in saltwater fishing.

Differences In Fishing Rods

There are many small, but very important differences in fishing rods that are designed to enhance the performance of the rod. Anglers should familiarize themselves with these differences and how they are designed to better your chances of successfully landing a whopper size fish.

The best choice for your fishing application, whether saltwater or freshwater, begins with a properly matching rod and reel combo, so if you prefer to use spinning reels, get yourself a spinning rod in graphite or fiberglass. If you are proficient in casting, try a conventional combo and benefit from the advantages of a conventional reel.

Either way, knowing how to take advantage of the latest technologically advanced fishing rod and reels will enable even the novice angler an opportunity at a fish of a lifetime.

Differences Between Important Reels

In that respect there are just a few different categories of fishing rods and reels to choose from. You will find spincast reels which will attach on the top of a casting rod, fly rods and reels, baitcasting reels which additionally mount on the top of a casting rod and spinning rods and reels.

The primary difference between casting rods and spinning rods would be that a casting reel is situated on top of the rod as opposed to a spinning reel attaching to the underside of the fishing rod. The same will be for your line guides or ferrules.

Fishing rods are typically made out of graphite, fiberglass, bamboo, wood and steel. A spincast reel comes with an enclosed face and it’s also super easy to use. The spinning reel comes with an open face in which you can physically view your spooled line. This kind of reel features a fixed spool, which means the spool itself doesn’t turn in the course of casting or retrieval.

 A wire bail apparatus is actually what enables your line to unspool throughout casting after it is disengaged and also on the flip side, coils your fishing line back on to the spool when it is engaged during retrieval. This type of reel may additionally be used as a right-handed or left-handed reel simply by relocating the handle from one side to the other.

These are generally used any time you are casting a lure which is equal to or less than a quarter ounce. And then there are baitcasting fishing reels. This kind of fishing reel does have a revolving spool that is supported by means of ball bearings. As with these, you’ll be able to physically observe your spool and line. Baitcasting reels tend to be used when fishing for larger sized fish or even when you’re using a heavier bait.

Factors To Consider When Buying Fishing Rods And Reels

There are many aspects to consider when you’re planning to buy fishing rods and reels. One significant point to think about will be the type of fish you are trying to catch. This can play several roles in deciding on which types to invest in. Another could be how frequently you intend on going fishing.

Just how many hours of the day do you plan to spend on the water repeatedly casting your line? What kind of struggle are these fish likely to give you? What type of lures or baits will you be using? What are the surroundings like where you will be fishing? These are merely a few of the aspects you should consider prior to deciding on which fishing rods and reels to utilize.

Fly Fishing

Fly fishing in fresh waters, which is gaining popularity more as an art form than serious angling, uses long, flexible and light rods. These rods cast ‘flies’ that mimic the movement of insects such as nymphs and such over the water surface. The fake flies are usually synthetic materials such as foam, string and such which resemble the insects.

Fly fishing is employed to catch trout, salmon and other fresh water species. The different fish species need different rod tautness and weight test line to counter the weight of the fighting fish. The rod size is another aspect dependent on the type of fish intended for fishing.

Fishing rods are numbered according to their weight. Smaller trout need rods with a smaller number while larger trout and bass require medium sized rods. Larger rods best accommodate the weight of salmon and tarpon.

The spin casting rods are used when the bait or lure is frequently cast and retrieved to unhook the catch. Being heavier, they are best suited for larger fish including the steelhead or the striped bass.

The right rods need to be correctly matched with suitable reels. The spinning wheels are hardy for vigorous freshwater fishing while remaining easy enough for beginners and seasoned anglers. While the original design was for fly fishing with trout and salmon, the newer models of these spinning reels are made sturdy to manage heavier baits and larger catches. They are also great with light tackles.

The line capacity of the reel needs to be suitable for the type of fish to be fishing for. Fishes such as trout and salmon tend to run more with the line, thus needing more line, unlike the bluegill or perch which are easier to catch with the cast length.

Another factor dependent on the type of fish caught is the line strength. A heavier line is necessary for heavier fish which also tend to be stronger at fighting. The ratings for the reels and the line can be found on the packaging. The gear ratio of the selected reels is also dependent on the type of fish being fished. The ratio indicates the number of times the fishing reels rotate when they are cranked each time. A faster ratio may not always be better, depending on the intended catch.

Choosing the right fishing rods and reels actually requires some understanding of the fish to be caught, so that the right tools are available for a fruitful fishing outing.

Conventional Rods

Unlike spinning rods, conventional rods have the guides of the rod mounted on top and have a gradual decrease in diameter as you approach the tip. Conventional rods have smaller guides because of the straight unwinding, with the spool of the reel in free-spool, of fishing line when casting from a conventional reel.

Conventional rods can also come with roller or rolling guides, typically used for big-game fishing or trolling. The reel should sit atop the reel seat, with the handle on the right side for right-handed anglers.

Lets Look At The Principals Required To Cast:

  1. Face your left foot in the direction of the cast, with your right foot in a comfortable position for balance. Twist your waist past your right foot as the more your body twists, the more power you will generate.
  2. Extend your right arm so that the tip of the rod is far back therefore allowing you to load the rod more and generate more power.
  3. Now its like a golf swing, Weight on the back foot, balanced on the left. Start moving your weight forward as you twist your body and cast. This action will provide more power.
  4. Load the rod. You can either swing the rod in an arc from the desired end direction to behind you with the sinker loading the rod tip, or you can load the rod by swinging the sinker so that its beyond the rod tip and loading the tip as well.
  5. The rod needs to be effectively loaded by beginning the cast slowly with a gradual acceleration until maximum speed is reached just prior to stopping the rod.
  6. The sinker will now go in the direction of the rod tip just before it was stopped.
  7. It is important that the rod tip is not lowered or raised again above the departure of the line from the rod tip.
  8. The longer the rod and the longer the casting stroke, the more the rod can be loaded and the further you can cast.

Some Important Notes.

  1. You will need to match your rod, reel and line weight. Check the guides normally printed on the rod and reel.
  2. The terminal weight must also match the rod and line weight.
  3. It will be a good idea to use a shock leader with at least a few turns on the spool. The greatest load is generated when the line starts leaving the spool.
  4. Practice, practice. Find a field and practice on it.
  5. Direction, accuracy and technique will come with practice.
  6. Don’t use brute force, rather be smooth. Start slowly and accelerate through the cast.


Ted Thomas

Hi there, I’m Ted Thomas from GrayWolfLife, an ardent adventure writer. I write for readers with a genuine interest in enjoying the great outdoors. By sharing my experiences camping, hunting and fishing, I hope to inspire others to fully explore the depths of their passion.


Notify of
Inline Feedbacks
View all comments