Safety tips to Use a Brad Nailer

March 24, 2018 • By Benjamin Wilson
The estimated reading time is 5 minutes

A brad nailer is a compact tool that you can use to fire brad nails. It is straightforward to carry, and the user can hold this in hand. You may have seen the brad nailer in many shops or houses but do you know how to use a brad nailer properly? Never mess with these types of tools until you have proper knowledge that how to use these.

There are two common types of these tools: electric and pneumatic. In simple words, you can say that a brad nailer is a compact and smaller version of finish nailer and you can use this tool in small working projects. In some situations, a finish nailer may not be a suitable choice as it can split the object into pieces, so brad nailer proves to be a better choice in such conditions. (1)

How to Use a Brad Nailer:

While using a brad nailer, you need to visit your nearest hardware store and buy a perfect

  • Hose adaptor
  • Teflon tape
  • Tool oils

These tools are needed to make sure that you are getting the best out of your equipment. Buy a hose adapter that fits according to the size of your brad nailer. Teflon tape is used to make sure that the connection between the hose adaptor and the device is not loose.

Avoid Blowouts

You must focus on your angle while shooting the nails. If you do not pay attention to the angle, then it is going to be a problem for you. Point your brad nailer towards the point where you want the nail to enter the wood. Just point it towards the end as you look your pool cue during the snooker. If a nail hits the knot in the wood, then don’t worry and choose another point to fire the nail.

Place nails accurately

Angle is very important if you want to use this correctly but placing the brad nailer at the perfect distance is also very important. If you keep the brad nail too close to the wood, then it will not hit the wood correctly, and if you keep it too away from the molding, then it will not act in the same way. So try to keep the brad nailer a few inches away from the wood or object.

Use right nail size

If you want to keep the pace of your work, then try to use the correct size of the nails. Changing the nails during any task will be bothersome so load the brad nailer with right sized nails. Choose a nail that can penetrate through the wood by 3/4 of the size.

Avoid under driven nails

If nails don’t set, then you need to take such nails out and then apply some more pressure. If a nail does not set, there can be some reasons like:

  1. The nail was not of the correct size.
  2. There was a knot in the wood.
  3. The pressure was not right.

Safety Tips

Using a brad nailer is not such a big deal, but you should be very careful while using these tools as a little nail can be very dangerous if it hits your body. Before using a brad nailer, make sure that:

  • You are wearing safety gears
  • You are holding the tool with a secure grip
  • Wires have proper insulation
  • Nails are properly loaded
  • Your object is in the right position

Why should you use Brad Nailer?

We face some little problems in our daily life that need proper fixing on an immediate basis and calling a professional for such small tasks seems an expensive deal. If you have a brad nailer in your toolkit, then you can quickly fix your little problems by yourself? So to save extra expenses, you need to learn how to use a brad nailer properly. Here are some essential benefits of Brad nailer:

  1. It is more economical.
  2. You can fix little issues easily.
  3. You don’t have to call a professional
  4. You don’t have to wait for help.

So this short article now gives you a better idea that how you can use a brad nailer just as a professional. Keep these tips in mind while using this tool. There is not any big difference between a brad nailer and finisher, but brad nailer is lightweight and easy to carry gadget. You can use this tool for any purpose. The only limit for use is your imagination. Also, you will get safety gas can info from Carcareninja.com

There are many damages where you think that you need to use substantial and professional means, but a single brad nailer can usually fix such issues quickly. If you own a manufacturing shop and have a lot of heavy work, then brad nailer may not be the best choice, but for pure house use, it is a tool that can save your day in case of any little problem.

You can read more about the reviews of best framing nailer from here.

Hope for the best user experience!

Benjamin Wilson

He is a fitness trainer and part-time blogger interested in nutrition and in leading a healthy lifestyle. He writes smart and inspirational articles on nutrition supported by scientific research and his own personal experience in the healthcare industry.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram